Lubbock, TXInsulation ReplacementSame-Day AvailableFree Inspection

Insulation replacement after rodent damage in Lubbock, TX.

Last reviewed: January 2026

An attic that lost its R-value to roof-rat traffic shows up first on the utility bill. The insulation has compressed under runways, soaked through with urine, and lost the air-trapping loft that R-38 blown-in is supposed to hold. By the time the homeowner notices the heating bill, the blanket is a health risk too. We remove the old material, vacuum the deck clean, and install fresh blown-in insulation back to spec, with the R-value verified at depth before sign-off.

Call (806) 207-3665

Insulation replacement after rodent damage in Lubbock, TX., Lubbock, TX rodent control

Licensed Insured Locally Owned Open 24/7

Insulation replacement after rodent damage is the removal of contaminated, compressed, or urine-saturated attic insulation following a rodent infestation and its replacement with new material at the correct R-value for Lubbock's climate zone. In Lubbock, TX, this service typically follows multi-season roof-rat infestations in older homes where the insulation predates modern standards and the colony compounded the wear.

When does insulation need to be replaced vs. cleaned?

Lubbock-trained technicians.

The key factor is the extent of urine saturation. Rat urine soaks into loose-fill insulation (the blown-in cellulose or fiberglass common in Lubbock's older housing stock) and does not fully disinfect on the surface, the contamination runs through the depth of the material. If the urine saturation extends across more than 20–25% of the attic floor area, removal and replacement is more cost-effective and more complete than trying to clean in place. Heavily compressed insulation, where nesting has reduced the R-value to the point that the thermal performance is compromised, should also be replaced regardless of contamination level.

We give a clear, documented assessment at the cleanup visit. We do not recommend replacement when cleanup is enough, and we do not recommend cleanup when replacement is the right answer.

Technician in PPE removing rodent-soiled insulation during attic cleanup — Full PPE required for rodent dropping cleanup. Hantavirus precautions on every job.

What insulation replacement includes.

Defined deliverables. No surprises mid-job.

Contaminated insulation removal: all existing insulation vacuumed out or bagged and removed from the attic. Decking exposed for disinfection.
Attic decking disinfection: full surface disinfection of attic decking, trusses, and any exposed surfaces before new insulation is installed.
New insulation installation: blown-in fiberglass or cellulose installed at R-38 (the current Energy Star recommendation for Lubbock's climate zone). Batt insulation available on request.
Air sealing: penetration points at electrical boxes, light fixtures, and HVAC boots sealed before insulation is installed.
Before-and-after documentation: photo record of soiled insulation removal and new installation provided at completion.

Pricing in Lubbock.

Final number is the inspection number.

Scenario	Typical range	Notes
Insulation removal only (per 1,000 sq ft)	$400–$700	Contaminated material removed and disposed of
Removal + blown-in replacement (per 1,000 sq ft)	$900–$1,600	Full replacement at R-38
Attic disinfection (included with replacement)	Included	Surface treatment before reinstallation
Air sealing (add-on)	$200–$400	Penetration sealing before new insulation installed

Inspections are free. Quotes confirmed before work starts.

Frequently asked questions.

How do I know if my insulation needs to be replaced or just cleaned?

The key indicators are urine saturation extent and compression level. If you can smell a persistent ammonia or musk odor from the attic, the saturation is significant. If the insulation is visibly matted or compressed in large areas, the R-value is compromised. We assess both at the cleanup visit and give you a clear recommendation.

What R-value should attic insulation be in Lubbock?

The U.S. Department of Energy recommends R-38 for Climate Zone 3, which covers Lubbock. Many older homes in Lubbock have far less, R-11 to R-19, which means that replacing the soiled insulation is also an opportunity to upgrade to current standards and reduce heating and cooling costs.

What type of insulation do you install?

We primarily install blown-in fiberglass or cellulose, which is the most practical option for attic replacement and provides good coverage around obstructions. Batt insulation is available on request for specific situations.

Does insulation replacement need to happen before or after exclusion sealing?

Exclusion sealing should happen first: or at least simultaneously. Installing new insulation before the entry points are sealed is counterproductive. We typically coordinate cleanup, exclusion, and insulation replacement in sequence or as a combined visit.

Will my homeowner's insurance cover insulation replacement?

Some policies cover rodent damage under sudden and accidental damage provisions; most exclude gradual damage. We provide documentation of the scope and extent of contamination for insurance claim purposes.

Do you dispose of the old insulation?

Yes. Removed insulation is bagged, sealed, and taken off the property for proper disposal. Contaminated insulation is not left in the attic or on-site.

How long does attic insulation replacement take?

A standard residential attic (1,000–1,500 sq ft) typically takes 4–8 hours for removal and replacement in a single day. Very large attics or those with difficult access may require two days.

✓

10–14 Day Follow-Up Guarantee

We return after treatment to confirm the activity has stopped, at no additional charge. No follow-up = no sign-off.